Click to enlarge
|
• Surface mounted electronic components.
• Compact heat sink.
• Full RF filter in and out delivers highest performance.
• Rated at 7.5 amps with 10 amp spikes
• Unique Hybrid Pulsing Design
• Designed for 6 - 8.4 volts
• Specifically designed for use with the DURALITE PLUSTM Battery but also works well with other battery chemistry types.
 SPECIFICATIONS & TECHNICAL INFORMATION
 All Duralite Regulators are proudly manufactured in the USA.
|
Click to enlarge
|
 High Current Voltage Regulator, with Heavy Duty Switch, 7.5 amp w/16ga wire, deans connectors
5.1, 5.3, 5.6, 6.0, 7.0 volt
For applications using newest "High current draw' digital servos. Regulator built w/High Current 16 ga wire & female deans connectors. Comes with deans to RX adaptor, weighs 2oz.
|
|
|
Click to enlarge
|
Voltage Regulator, 7.5 amp w/standard 22ga wire
5.1, 5.3, 5.6, 6.0, 7.0 volt
For use with aftermarket switch. Weighs .6oz (20grams)
|
|
|
Click to enlarge
|
Voltage Regulator with Fail Safe Switch, 7.5 amp w/standard 22ga wire
5.1, 5.3, 5.6, 6.0, 7.0 volt
If the switch were to fail regulator stays in the on state until you unplug it from the battery. Not suitable for ignition applications due to fail safe feature.(See #804001 Digi Switch)
|
|
|
Click to enlarge
|
Voltage Regulator with Heavy Duty Fail Safe Switch, 7.5 amp w/standard 22ga wire
5.1, 5.3, 5.6, 6.0, 7.0volt
Ideal for 3D helicopter & 3D aircraft applications. Regulator with the FUTABA* heavy duty fail safe switch. The switch itself is a multi pole design which has proven to withstand vibration better than the standard single pole switch. If the switch were to fail regulator stays in the on state until you unplug it from the battery. Not suitable for ignition applications due to fail safe feature. Weighs 1.6oz (45grams)
|
|
|
 |
Voltage Regulator for DSC 7.5 w/standared 22 ga wire #54051-DSC - 5.1 volt
Ideal for use with DSC transmitter link on any aircraft, helicopter or jet. Weighs 1.6oz (45grams)
|
|
|
Click to enlarge
|
#804000 - Electronic Switch
Parallel redundant switch and regulators all in one. Ideal for smaller models and models up to 27%. Will handle up to 5 amps continuous. The switch is a fail safe type with led lights for visibility. Designed to work with any of the Duralite Plus batteries.
|
|
|
Click to enlarge
|
#804001 - Digi Switch
Light weight digital switch with built in 5.5 volt regulator. Will handle up to 5 amps load. External led will tell you the voltage of your DURALITE PLUS battery at a glance. Rugged fiber glass filled plastic case is virtually indestructible. Perfect for Pattern planes where weight is critical. Excellent for ignition applications
|
|
|
Click to enlarge
|
Voltage Step Down for Helicopter Tail
#55053 – .5 volt step down for use with a 6 volt regulated power supply
#55055 – 1.5 volt step down for use with a 7 volt regulated power supply
Economical, light weight option for pilots who want to use a 6 or 7 volt regulated power supply in a helicopter while not effecting the operation of the gyro. Recommended for use with FUTABA* 9241, 9251, 9253, 9254, 9255, 9256 servos.
NOTE: Item is not a regulator. Not recommended for NiCad or NiMh or A123.
Specifications: 6.75" long, Weighs .2 oz
Details & Installation
|
|
|
Click to enlarge
|
Ignition Power Wire Adaptors
#32502 - Universal 3W
#32503 - Universal DA
#32504 - Universal Multiplex
Both the 3W & DA Ignition Power Wire Adaptors plug into the DURALITE Regulator and then into the ignition connection. Saves the trouble of making up the lead and soldering on the connection.
The Universal Multiplex Power Adaptor converts a regular RX battery into a powerbox battery. One end is a black female JR connector and other end a MALE green multiplex connector that plugs into the ECU or POWERBOX.
SPECS: 22GA wire, Black female JR end, 3-4" long
|
|
|
SALE! on select EVO packs
